"Most devices with a well-specified connector will not have any reverse bias protection in them because both it shouldn't be needed and for the technical reasons of power loss and space used.
Reverse protection is usually done with diodes, the canonical "one-way valve" of electronics. Diodes have a voltage drop across them, usually 0.6V for standard and 0.4V for Schottky types. Using one of these to protect one rail means you'll have about 1W lost to heat when charging at 3A. They are also not small for the currents involved with high-speed charging, being about 7x6x2.5mm for the smallest ones I can find that can handle 3A.
Devices don't usually have too much in the lines of over current protection outside of something like a polyfuse because the device will dictate the current used; if everything is okay in the device it'll set the charging rate and it only needs the most basic of protections in the case that something goes grossly wrong with the device. Sources are what really need overcurrent protection as they don't "have a say" in how much current is drawn."
