It's odd the MiSTer page doesn't even list an Atari ST core as available. Odd given the heritage (and name).
On the other hand, there's an X68000 core. That's pretty amazing.
But apart from bigger FPGA one of the big advantages of MiSTer over MiST is HDMI output. Dealing with VGA is a real pain in the but, esp if you want to hook up to a living room TV.
I'll probably invest in MiSTer at some point, but it would be nice if they had an expansion which added MIDI and 9-pin joystick ports like you could get on the MiST.
https://twitter.com/smokemonstertwi/status/10523148009807298...
SuperNT - I love it, i don't have the jailbroken firmware and play strictly from games. I have made several Super Mario based carts from Rom Hacks and i find not having save states has probably made me a better player. The system is dirt simple, i plug a game in and it plays. There is a menu and you can play with settings but you dont have to. Using only purchased carts makes this legal .
Retropi - Very nice allows you to play up to the PSX. All is pretty much smooth and there are so many howto's anyone can set it up. If you have never played on the original hardware you will never probably never know if there are any issues with the emulation. Still a very nice choice and cheap. Unless you dump your own ROMs you have to use illegal content on this (and dont lie, almost no one dumps their own ROMs).
MiSTer - This is very nice. It boots quick, the emulation is great. The menu is easy to navigate, but very ugly (no scraping or any game information very folder driven). controller set up is not difficult, but is not as straight forward as retropi. Installation is simple compared to retropi. Very expensive ($130 for the board and at least $25 for the SDRAM board unless you build your own, USB Hub as well). Arcade support is limited. Still have to provide your own ROMS.
All three choices are still great depends what you want to do. There is always room for all three options (I realize the SuperNT is not a multisystem machine, but it i mean a dedicated FPGA system, they are coming out with their sega genesis FPGA as well).
Wondering what the pros/cons are of using this vs a raspberry pi.
I found it very easy to get started, although first you have to buy a compatible FPGA (iCEstick etc.) and make an adapter for your preferred output device. The advantage of the MISTer is that you have all the connectors, FPGA cores for popular platforms and a couple of ARMs for when things get complicated.
Raspberry PI is fine, but not great for latency, assuming you need that extra 1/60 second. (HDMI monitors add so much latency though!) Some folks have had success connecting PIs to old CRTs though.
By comparison, Analogue sells the Super NT which is their own FPGA SNES that uses micro USB for power and probably requires about as much power as a Pi, but is comparable to Higan in terms of accuracy. Their implementation still uses physical carts though, so they skipped on implementing the special chips that were contained in the cartridge of various games. For _that_, there is the SD2SNES flash cart which runs its own FPGA for most of the chips (SA-1 support in beta).
[1] https://byuu.org/emulation/higan/ [2] https://arstechnica.com/gaming/2011/08/accuracy-takes-power-...
