undefined | Better HN

0 pointsnikau3y ago0 comments

I mean its reported tesla are looking around for alternate press suppliers and people in the industry have also commented that trying to make a casting that big is pretty ambitious and a 60% scrap rate is not unexpected.

People have also calculated deliveries of gigapress cars to confirm the scrap rate so its not BS.

Then there is the issue of the casting cracking in an accident which can potentially write off a car that would have been repairable with traditional spot welded designs, this will increase insurance rates for Teslas long term.

So it remains to be see if its a genius move from Musk, or if traditional spot welded designs are in fact the better approach.

0 comments

sixQuarks3y ago

So it remains to be see if its a genius move from Musk, or if traditional spot welded designs are in fact the better approach.

Fair enough. There is a chance it may not work as they planned, but the fact that they are buying more gigapresses tells me they are confident they will get it to work.

Munro and associates did a couple of videos on gigcasting. They did talk about what happens in crashes and did not see it as a major concern. Munro is universally recognized as the leading experts in automotive manufacturing.

link to video where they talk about cracking the gigacast and why it doesn't matter:

https://youtu.be/WNWYk4DdT_E?t=335

Watch the full episodes here:

https://www.youtube.com/watch?v=WNWYk4DdT_E

https://www.youtube.com/watch?v=dyde8G7mp-4

nikauOP3y ago

Sandy has his own agendas - since he started to buy tesla stock I take his commentary with a grain of salt.

You notice when he talked about a failed casting he didn't mention anything around the fact that castings are brittle relative to sheet metal and bits can snap off vs flex.

So something like a suspension mounting point can break off the casting and that's a write off as its very hard if not impossible to weld back.

sixQuarks3y ago

Actually Munro has sold all his TSLA stock, which wasn’t much to begin with, precisely to address any criticism about being biased.

Munro actually started off being severely critical about Tesla’s build quality, but once they started tearing down the vehicle, started realizing the superior manufacturing prowess of Tesla, they switched focus and bet their company on electric vehicles being the future.

I’ve been following Munro for over a decade, I’m involved in the automotive sector, nothing to do with Tesla, I’ve seen Munro’s full evolution and 180 turnaround on Tesla.

j / k navigate · click thread line to collapse

0 pointsnikau3y ago0 comments

People have also calculated deliveries of gigapress cars to confirm the scrap rate so its not BS.

So it remains to be see if its a genius move from Musk, or if traditional spot welded designs are in fact the better approach.

0 comments

sixQuarks3y ago

So it remains to be see if its a genius move from Musk, or if traditional spot welded designs are in fact the better approach.

Fair enough. There is a chance it may not work as they planned, but the fact that they are buying more gigapresses tells me they are confident they will get it to work.

link to video where they talk about cracking the gigacast and why it doesn't matter:

https://youtu.be/WNWYk4DdT_E?t=335

Watch the full episodes here:

https://www.youtube.com/watch?v=WNWYk4DdT_E

https://www.youtube.com/watch?v=dyde8G7mp-4

nikauOP3y ago

Sandy has his own agendas - since he started to buy tesla stock I take his commentary with a grain of salt.

You notice when he talked about a failed casting he didn't mention anything around the fact that castings are brittle relative to sheet metal and bits can snap off vs flex.

So something like a suspension mounting point can break off the casting and that's a write off as its very hard if not impossible to weld back.

sixQuarks3y ago

Actually Munro has sold all his TSLA stock, which wasn’t much to begin with, precisely to address any criticism about being biased.

I’ve been following Munro for over a decade, I’m involved in the automotive sector, nothing to do with Tesla, I’ve seen Munro’s full evolution and 180 turnaround on Tesla.

j / k navigate · click thread line to collapse