undefined | Better HN

0 pointsmiah_3y ago0 comments

I went to a "tech school" to learn computers while in High School in the 90's. The tech school also had classes for 'the trades', it was set up to prepare Michigan kids for careers (Careerline Tech IIRC).

Anyway. A big part of that class was learning to clean, repair, and manage printers. Again, it was the 90's, and we were high school kids. We came out quite capable with many computer skills but the printer stuff really stuck with me. I've done technical support throughout the years and have setup hundreds of printers.

The printers of today are awful landfill fodder compared to the Okidata's of the 90's. Pure simplicity and speed vs FULL COMPUTERS, with scanning, faxing, and every other imaginable feature crammed in with zero hope of doing anything other than replacing the toner.

0 comments

com2kid3y ago

> The printers of today are awful landfill fodder compared to the Okidata's of the 90's. Pure simplicity and speed vs FULL COMPUTERS, with scanning, faxing, and every other imaginable feature crammed in with zero hope of doing anything other than replacing the toner.

The first Laserwriter in 1985 had more processing power than the Macintosh it was sold to accompany.

Printers have been full computers for a long time now. As we expect them to do more and more, the computers in them get more and more complex.

alpaca1283y ago

> As we expect them to do more and more

Who does? Who asked for updates blocking third-party ink, 1GB "drivers", full-color "test prints" each time you switch it on, ...?

Printing reliably doesn't sound too demanding, manufacturers reached that point long ago, and since then I haven't seen all that much groundbreaking innovation. Sure, things like wifi were added but that doesn't require cutting-edge technology - consumer devices could handle that 20 years ago, and more reliably than the printers I've used. I also haven't heard of anyone being excited about NFC in printers, and from experience I can say it's not nearly intuitive or frictionless enough to warrant the integration.

com2kid3y ago

> Who does?

The majority of my printing happens from my smartphone, so my printer needs to be on wifi, and needs to be able to reliably print from Android and iOS.

Accordingly, it needs firmware updates because phones break how they work all the time.

> things like wifi were added but that doesn't require cutting-edge technology - consumer devices could handle that 20 years ago

Not just wifi, multiple protocol for connecting to printers. Also that wifi needs to be 5ghz so I don't have to switch over to a 2.4ghz legacy network every time I want to print (which I had to do with my previous 2.4ghz only wifi printer!)

The onboard touch screen + embedded OS means I don't need to set anything up through a computer or smartphone app.

FWIW I have a black and white laser printer from Brother, I've never had to install a driver, I just plugged it in, typed my wifi PW on to the touch screen, and after a firmware update on first use it has happily been allowing anyone connected to my wifi to print w/o any hassle.

Marsymars3y ago

> The majority of my printing happens from my smartphone, so my printer needs to be on wifi

It needs to be on your home network, but it doesn't need to be connected to wifi per se. Ethernet works fine, including ethernet to a wireless mesh AP.

1 more reply

spockz3y ago

I fixed this by adding a printer server to my NAS and use that for AirPrint and the like. Smart power socket to prevent the printer from drawing power all the time. No need to have a smart printer.

1 more reply

hinkley3y ago

People used to buy HP Laserjet 4 printers at auction because they were peak stability. From the look of things the 4 introduced the direct predecessor to the wire protocol printers use today (PCL 5e vs PCL 6 variants)

https://en.m.wikipedia.org/wiki/Printer_Command_Language

ilyt3y ago

Our helpdesk offered us to take our LJ2100 and get us something newer.

Many insults were thrown. He didn't try again

hinkley3y ago

There were a ton of companies selling refurbished or knockoff toner cartridges for those things too. As good as the LJ was, the fact that they had easy access to cheaper supplies just accelerated the process of selection.

outworlder3y ago

> The printers of today are awful landfill fodder compared to the Okidata's of the 90's.

Maybe. But how expensive were they?

I can buy a good laser printer for under $200 these days. It will be more compact, lighter, mechanically simpler and use way less power than older printers. Something has to give.

Some older printers were really overengineered (which in many cases did make them more reliable), but that has a cost. Turns out, consumers didn't want to pay those costs.

j / k navigate · click thread line to collapse

0 comments

com2kid3y ago

The first Laserwriter in 1985 had more processing power than the Macintosh it was sold to accompany.

Printers have been full computers for a long time now. As we expect them to do more and more, the computers in them get more and more complex.

alpaca1283y ago

> As we expect them to do more and more

Who does? Who asked for updates blocking third-party ink, 1GB "drivers", full-color "test prints" each time you switch it on, ...?

com2kid3y ago

> Who does?

The majority of my printing happens from my smartphone, so my printer needs to be on wifi, and needs to be able to reliably print from Android and iOS.

Accordingly, it needs firmware updates because phones break how they work all the time.

> things like wifi were added but that doesn't require cutting-edge technology - consumer devices could handle that 20 years ago

The onboard touch screen + embedded OS means I don't need to set anything up through a computer or smartphone app.

Marsymars3y ago

> The majority of my printing happens from my smartphone, so my printer needs to be on wifi

It needs to be on your home network, but it doesn't need to be connected to wifi per se. Ethernet works fine, including ethernet to a wireless mesh AP.

1 more reply

spockz3y ago

I fixed this by adding a printer server to my NAS and use that for AirPrint and the like. Smart power socket to prevent the printer from drawing power all the time. No need to have a smart printer.

1 more reply

hinkley3y ago

https://en.m.wikipedia.org/wiki/Printer_Command_Language

ilyt3y ago

Our helpdesk offered us to take our LJ2100 and get us something newer.

Many insults were thrown. He didn't try again

hinkley3y ago

outworlder3y ago

> The printers of today are awful landfill fodder compared to the Okidata's of the 90's.

Maybe. But how expensive were they?

I can buy a good laser printer for under $200 these days. It will be more compact, lighter, mechanically simpler and use way less power than older printers. Something has to give.

Some older printers were really overengineered (which in many cases did make them more reliable), but that has a cost. Turns out, consumers didn't want to pay those costs.

j / k navigate · click thread line to collapse