How can I build a simple pulse generator to demonstrate transmission lines (opens in new tab)

sometimes, I realize how much is taken for granted these days that when I stop to think about is one of those "whoa" (in a Neo voice) moment. being able to time something in the picosecond range just gives me a wry smile.

I am using Leo Bodnar’s fast pulse generator (SMA) in my lectures to teach transmission lines. With sufficient length (I use ~1m) it works quite well to demo with a low cost scope. I originally bought it for TDR with 40GSPS/15GHz scope, which works very well with few orders of magnitude smaller lengths. Old on has upper length limit with 10MHz fixed frequency. There is a new one available with external sync and variable frequency, but I have not bought/tested it.

Yeah, that's a pretty awesome idea. The only critical spec for the transistor is the time to get into saturation, the actual pulse length coming from the propagation of the discharge of the coax segment from the collector end to the far end. When the capacitance of that coax is discharged, the pulse stops, even with the transistor still on.

Avalanche transistors, like the tunnel diodes mentioned by another poster, had been widely used in the past for generating fast pulses.

However, nowadays it is difficult to find any bipolar transistors that are suitable to be operated in the avalanche mode or any tunnel diodes, because these were fabricated using older technologies that are not suitable for the semiconductor devices that are popular today, so most such fabrication lines have been closed, due to insufficient demand.

Only for extremely few bipolar transistors the characteristics of the avalanche mode operation were specified by their manufacturer, so for most devices using avalanche transistors the transistors for each built device had to be cherry picked by testing many transistors of a type known to include suitable transistors.

For transmission lines: _Similarities of Wave Behavior_, presented by Dr. J. N. Shier (of Bell Labs fame, and whose team invented the phototransistor):

https://www.youtube.com/watch?v=DovunOxlY1k

It's an easy thing to watch at any level, with both brilliant practical demonstrations and supporting math provided.

W2AEW on YouTube was one of my introductions to high-speed analog electronics (and I had the pleasure of working with him later on).

An Electrical Engineering course, or a book on practical circuit design.