Designing an FPGA Calculator from Scratch (opens in new tab)

(baltazarstudios.com)

72 pointszdw7d ago10 comments

10 comments

Ten minutes in it looks like a great project walkthrough from design to physical device build.

Good start for anyone interested in the guts of going from logic gates to math() primitives ( add, mult, tan, sin, etc ).

Two snippets from the lede, one from a chapter heading:

  This is a scientific BCD calculator that uses binary-coded decimals, the same internal number format HP used in its scientific calculators going back to the 1970s. It represents every decimal digit as a 4-bit nibble, which means perfect decimal accuracy, no floating-point conversion errors, and an architecture that is genuinely shaped by the problem it solves. 

  Across ten chapters, you will follow full arc: the architectural decisions and tradeoffs, the numerical algorithms (addition, multiplication, CORDIC for trig, logarithms), the custom CPU design and its 12-bit instruction set, a hand-written two-pass assembler in Python, the microcode that runs on that CPU, a scripting layer for high-level key functions, and finally the physical board with its battery, display, and keyboard.

Chapter 6 (of 10):

  No general-purpose CPU has nibble-addressable memory and addressing modes designed to walk a 16-digit BCD mantissa — so this post designs one.

I like it.

musicale4d ago

I like FPGA projects, but there is really nothing preventing you from implementing decimal arithmetic in software on a cheap microcontroller.

foota6d ago

I would love to have some real application that needs an FPGA :) Someday perhaps.

avmich6d ago

You would perhaps need to change the viewpoint for that. Theoretically, there is nothing which can't be achieved - functionally - without FPGA. However, that doesn't mean some problems can' be solved more conveniently using FPGA, and the solutions turn out better in some regards.

atultw6d ago

Could you share some of those applications which are better solved with an FPGA? As a student I have some ideas but am interested to hear more.

Imustaskforhelp6d ago

OTOH, I recently learnt that Jane street deploys their own FPGA servers for high frequency trade.

1 more reply

mrheosuper6d ago

i was thinking of using FPGA to control led matrix, the algorithm is not hard, it's just there are too many pin to control, they need high clock rate if you want high color depth, a using MCU bit bang is not really a choice.

RicoElectrico6d ago

And Colorlight i5/9 boards are made for that very application; it just so happens they're a reasonable minimal devboards for ECP5 FPGAs. I don't think right now you can get anything more capable for the price (Yeah, there are super cheap decommissioned miners with Zynq, but there's almost no I/O fanned out.)

i_don_t_know6d ago

Hard real-time control systems is one application.

j / k navigate · click thread line to collapse